This forum is read-only. Please post new topics in our Q&A forum.

SysEx Receive Problem

General Discussion about Bome's Send SX

Moderator: florian

Locked
xelasoma
New User
Posts: 1
Joined: Thu Jan 31, 2013 2:31 pm

SysEx Receive Problem

Post by xelasoma » Thu Jan 31, 2013 2:45 pm

Hello,

I have recently tried out the Borne's SysEx software on my Yamaha SY22.

After familiarising myself with the software I successfully made a bulk dump of data from my synth to my computer. Great!

However, when I come to attempt a 'receive' dump to the SY22 the following issue occurs:

- The synth displays 'Bulk Receiving' and remains on that message.

- The Borne's SysEx editor initially reads out data indicating a transmission but then displays a message at the top bar saying ' Bourne's SenSX (Not Responding)'. The editor then freezes out and I have to close the program completely and disconnect my synth to kill the freeze.

Do you think there is a simple setting on my synth that is causing a blockade of information from getting through or something else? I have checked the SY22 midi peramiters and receive channel is set to 'omni'.

I really appreciate any light that can be shed on this.

Alex.

User avatar
florian
Bome Software: Founder
Posts: 2435
Joined: Thu Apr 28, 2005 10:09 pm
Location: Munich, Germany
Contact:

Re: SysEx Receive Problem

Post by florian » Fri May 03, 2013 8:17 am

Hi, which version of SendSX are you using? The latest version provides throttling, which might help in your case:
http://www.bome.com/products/sendsx/downloads

You can try different settings of speed in the options|settings screen, and check and/or uncheck "split long messages" in the options menu (then reload the file).

Best regards,
Florian

Locked